Level Switches

Product Details:

We are offering Rotating Paddle Level Switch to our clients.

Salient Features:

• Level switch for powders and free-flowing solids
• Flexible coupling (optional as per application)
• Robust, dust and watertight housing
• Extended life by motor shut off design
• Sealed bearings
• Interchangeable paddle assemblies
• Magnetic Clutch mechanism

Main Application Areas:

• Agriculture: Beet slice, Hard crop
• Chemical industry: Plastic powders, Granules, Pellets
• Food industry: Sun flower, Sun flower cod
• Building industry: Sand, Calcium powder, Gypsum, Coffee and Cacao Powder, Flour, Sugar, etc
• Energetics: Active soot, Coal powder & Fly ash

Product Details:

We are known manufacturer, Exporter and supplier of Capacitance Level Transmitter. The Capacitance Level Transmitter are compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tank or storage vessels. Measuring range of Capacitance Level Transmitter is 0.25 t0 3 m for rod probe version. The probe of Capacitance Level Transmitter forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the robe become covered with material to be measured the capacitances will increases and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non- conductivity Liquids.Probe Specification Chart:Conductive material: Water based solutions. Acids,Based etc – only insulated probe are suggested.Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used

Product Details:

We are known manufacturer, Exporter and supplier of Capacitance Level Transmitter. The Capacitance Level Transmitter are compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tank or storage vessels. Measuring range of Capacitance Level Transmitter is 0.25 t0 3 m for rod probe version. The probe of Capacitance Level Transmitter forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the robe become covered with material to be measured the capacitances will increases and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non- conductivity Liquids.Probe Specification Chart:Conductive material: Water based solutions. Acids,Based etc – only insulated probe are suggested.Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used

Product Details:

We are offering Rotating Paddle Point Level Switches to our clients. We design the given product following industrial standards by making use of best quality material and modern technology.

Product Details:

Product Details:

We are offering Chute Level Switch to our clients. We design the given product following industrial standards by making use of best quality material and modern technology.

We are known manufacturer, Exporter and supplier of Capacitance Level Transmitter. The Capacitance Level Transmitter are compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tank or storage vessels. Measuring range of Capacitance Level Transmitter is 0.25 t0 3 m for rod probe version. The probe of Capacitance Level Transmitter forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the robe become covered with material to be measured the capacitances will increases and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non- conductivity Liquids.Probe Specification Chart:Conductive material: Water based solutions. Acids,Based etc – only insulated probe are suggested.Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used

Additional Information:

• Minimum Order Quantity: 1 Piece

Details :-

• Designed as per ISO5167/BS1042.
• On line density compensation delivers very accurate results.
• Various Types of IBR/Non-IBR valves for isolation and drain.
• Various Sizes of Orifice Assemblies with or without IBR Certificate.
• Complete System is Engineered to suit your requirements.
• Highly Reliable and Repeatable System; No Moving Parts.
• Easy for Calibration.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

Backed by the support of our experienced professionals in this domain, we have been able to bring forward a family in the range of Tuning Fork Level Switch. The provided switches are manufactured by our adept professionals using the best grade basic material and modern technology. Offered switches are widely appreciated by our clients owing to its simple installation and features. Moreover, our clients can avail this switch at most affordable price.

Product Details:

The vibrating fork level switch consists of a fork-shaped probe, typically made of stainless steel, with one or two tines. The probe is mounted vertically or horizontally at the point where the level needs to be monitored. The tines of the fork are designed to vibrate at their natural frequency, which is typically in the range of tens or hundreds of Hertz.

When the fork is in air or in an empty condition, it vibrates freely at its natural frequency. However, when the tines come into contact with a solid or liquid material, the vibration is dampened or attenuated. This change in vibration is detected by a piezoelectric crystal or a vibration sensor located in the fork assembly.

Product Details:

Capacitance Level Sensor is a compact, low cost, level transmitter with analogue out-put designed to measure the level Of various non viscous, non conductive fuel oils, such

as Diesel. Measuring range is 0.2 to 2 m for rod probe version. The probe forms an electrical capacitor with the

grounding stell well provided on the sensing rod With the vessel empty, an initial capacitances exists between the electrode And the metal well or the auxiliary reference probe. When the probe become covered with material to

be measured the capacitances will increase and change will be measured and convered into an analogue output signal proportional to the change.

Product Details:

We are the leading manufacturer, exporter and supplier to provide our prestigious clients an optimum quality range of RF Admittance Level Switch. Our provided switches are designed and manufactured under the guidance of our professionals using the advanced technology. Offered switches are available in different technical specifications and can be as per the demands of our valuable client's application requirements. Furthermore, these switches can be availed by our clients at industry leading prices.
It is widely applied in various products such as Building industry materials, cement, sand, lime, milk powder, flour, salt, food grains, powder, granular, chemical and mining etc. These comprise of a specially designed electronics and sensing probe using Driven Shield Coat Guard circuit and corresponding 3-Element Probe. The electro-mechanical combination of the Driven Shield technique makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The measured signal does not flow through the hopper wall through the probe in the backward direction but flows only through the material.

The salient features of this level measuring instrument are as follow:

• Three Element Coat Guard Technology
• Can be configured either for High or Low-Level point switching
• Ignores material build-up on the probe
• Suitable for the highly dusty environment
• High Reliability
• Fast and Easy Installation Simple Calibration
• Field selectable operation logic
• Provides economical solutions
• Various models not required

Product Details:

We are offering Tuning Fork Level Switches to our clients. We design the given product following industrial standards by making use of best quality material and modern technology.

Product Details:

JAYCEEADMITT is widely applied in various products such as Building industry materials, cement, sand, lime, milk powder, flour, salt, food grains, powder, granular, chemical and mining etc. These comprise of a specially designed electronics and sensing probe using Driven Shield Coat Guard circuit and corresponding 3-Element Probe. The electro-mechanical combination of the Driven Shield technique makes the system immune to the material build-up on the probe and material bridging between the probe and the hopper wall. The measured signal does not flow to the hopper wall through the probe in the backward direction but flows only through the material.

The salient features of this level measuring instrument are as follow:

• Three Element Coat Guard Technology
• Can be configured either for High or Low Level point switching
• Ignores material build-up on the probe
• Suitable for the highly dusty environment
• High Reliability
• Fast and Easy Installation Simple Calibration
• Field selectable operation logic
• Provides economical solutions
• Various models not required

The details of these point level switch are as follow:
Switching Unit:

• Housing: Aluminum, weather proof, powder coated. Integral with The probe/ suitable for back panel mounting
• Safety operation: Field selected switch over for min. or max. (FSL/FSH) switching points

Coat Guard Sensing Probe:

• Mounting: Screwed 1 ½ BSP (standard) Or Flanged (optional)
• Sense rod: Stainless steel
• Shield: Stainless steel
• Insulation: PTFE (standard) other on request and as per application.

Product Details:

We are offering Liquid Level Switch to our clients. We design the given product following industrial standards by making use of best quality material and modern technology.

Product Details:

We are offering Float Level Switch to our clients. We design the given product following industrial standards by making use of best quality material and modern technology.

Product Details:

We are known manufacturer, Exporter and supplier of Capacitance Level Transmitter. The Capacitance Level Transmitter are compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tank or storage vessels. Measuring range of Capacitance Level Transmitter is 0.25 t0 3 m for rod probe version. The probe of Capacitance Level Transmitter forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the robe become covered with material to be measured the capacitances will increases and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non- conductivity Liquids.Probe Specification Chart:Conductive material: Water based solutions. Acids,Based etc – only insulated probe are suggested.Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used

Product Details:

vibrating fork level switch is a reliable and versatile device used for level detection in industrial applications. It offers accurate and consistent performance in monitoring the presence or absence of solids or liquids, contributing to process control, inventory management, and safety in various industries.

Product Details:

The Aqua Fork Point Level Switch is a cutting-edge device designed to provide accurate and reliable liquid level detection in a variety of industrial applications. Whether you need to monitor the level of water, oil, chemicals, or other liquids, this innovative switch offers a robust solution to ensure efficient and safe operations.

Product Details:

We are known manufacturer, Exporter and supplier of Capacitance Level Transmitter. The Capacitance Level Transmitter are compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tank or storage vessels. Measuring range of Capacitance Level Transmitter is 0.25 t0 3 m for rod probe version. The probe of Capacitance Level Transmitter forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the robe become covered with material to be measured the capacitances will increases and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non- conductivity Liquids.Probe Specification Chart:Conductive material: Water based solutions. Acids,Based etc – only insulated probe are suggested.Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used

Product Details:

We are known manufacturer, Exporter and supplier of Capacitance Level Transmitter. The Capacitance Level Transmitter are compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tank or storage vessels. Measuring range of Capacitance Level Transmitter is 0.25 t0 3 m for rod probe version. The probe of Capacitance Level Transmitter forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe. With the vessel empty, initial capacitances exists between the electrode and the metal well or the auxiliary reference probe. When the robe become covered with material to be measured the capacitances will increases and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non- conductivity Liquids.Probe Specification Chart:Conductive material: Water based solutions. Acids,Based etc – only insulated probe are suggested.Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used

Product Details:

We are offering Diaphragm Level Switch to our clients. We design the given product following industrial standards by making use of best quality material and modern technology.

Product Details:

Suitable for very low conductive liquid, DM  water or liquids having conductivity as low as 1 Micro Siemens.

Product Details:

Details :-

• Designed as per process aoolication
• On line density compensation delivers very accurate results
• Complete System is Engineered to suit your requirements.
• Highly Reliable and Repeatable System; No Moving Parts.
• Easy for Calibration.

Product Details:

We are highly experienced Manufacturer, Exporter, and Supplier of Boot Level Switch. The Diaphragm Level Switch is used for indicating, controlling, and regulating the level of granulated or powdered dry materials, flowing through a silo, hopper or chute. We offer superior Diaphragm Level Switch that is made up of quality material with perfect finishing. Known for its flawless features, Diaphragm Level Switch is highly in demand among our customers.

Operation
The device must be mounted so that the diaphragm membrane is exposed to the product whose level should be controlled, in such a way that the product, can press the diaphragm. The material weight presses the diaphragm which is adjusted with the microswitch through a flexible mechanism. A lever attached to the diaphragm transfers the pressure to the microswitch which changes the contact. When the material recedes the diaphragm comes back to its normal position and the microswitch again changes the contact.

Product Details:

We are offering Tuning and Vibrating Fork Level Switches to our clients. It is manufactured using quality raw materials and latest technology.

Product Details:

We are offering Honeybee Fork Liquids Level Switch to our clients. It is manufactured using top quality materials and latest technology and tested under various quality parameters.

Product Details:

We are offering Magnetic Float Liquids Level Switch to our clients.

Salient Features:

• Hermetically sealed glass encapsulated reed switch.
• The option of a Remote or Integral control unit.
• The option of Remote Counter & Totalizer for volume calculation.
• The option of Intrinsically Safe Switch.

Applications:

• High & Low Alarm in Process Tanks
• Water Treatment & Filtration Systems
• Pump & Cooling Circuit Protection

Product Details:

We are a unique name in the industry to provide our precious clients an exclusive range of Vibrating Fork Level Switches. Offered switches are exclusively manufactured using the modern technology in synchronization with the set industry standards. Owing to their easy installation and premium quality, these switches are very popular among our precious clients.

Product Details:

We are instrumental in offering a wide range of Vibrating Rod Level Switch to our clients. In synchronization with the set industry standards, our provided switches are precisely manufactured using high-grade basic material and latest technology. Owing to their durability and easy installation features, these switches are widely appreciated by our precious clients. Moreover, to ensure the best quality, the offered switches are tested by our quality auditors on different quality parameters. 
Two Tines vibrating or tuning forks have a limitation of grain size for various applications with the issue of material grain getting struck into the fork tines. Vibrating Rod Level Switch is overcome by Vibrating ROD Level Switch and the material having the tendency to block the tines. Vibro - Limit sensing switch for Solids is based on vibration principle based on Piezo Vibration Technology.

Applications:

• Free flowing Grains, Solids
• Granular Plastics and Bulk Solids in Silos
• Hoppers and Agri-Machinery

Product Details:

We are offering RF Capacitance Level Switch to our clients. It is manufactured using quality raw materials and latest technology.

Product Details:

Product Details:

suitable for boot level as well as Chute  choking detection

Product Details:

Sitable for Fly ash ESP/ Bag filters

Product Details:

We are offering Vibrating Fork Solids Level Switch to our clients. It is manufactured using quality raw materials and latest technology.

Product Details:

We are offering Conductivity Level Switch to our clients. We design the given product following industrial standards by making use of best quality material and modern technology. Our Conductivity level switch is suitable for very low conductivity also Such as DM water

Product Details:

Available in Integral and Remote mounting, also for Hifh temperature. 

Details 

• Complete System is Engineered to suit your requirements.
• Highly Reliable and Repeatable System; No Moving Parts.
• Easy for Calibration.

Additional Information:

• Minimum Order Quantity: 1 Piece

Details :-

• Designed as per ISO5167/BS1042.
• On line density compensation delivers very accurate results.
• Various Types of IBR/Non-IBR valves for isolation and drain.
• Various Sizes of Orifice Assemblies with or without IBR Certificate.
• Complete System is Engineered to suit your requirements.
• Highly Reliable and Repeatable System; No Moving Parts.
• Easy for Calibration.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

We are offering WASP Fork Level Switch to our clients. It is manufactured using quality raw materials and latest technology.